Create a garden pond

In the garden of your house is the undisputed star of vegetation. However, more and more people opt to install a small pond where water and nature are founded to offer a unique landscape of unique beauty. Besides decorating, the water will cool the atmosphere of your little garden.

In this report we suggest building your own water space. This is a simple task that you perform yourself without spending large sums of money. Follow the steps below and we provide you with in a short time you can have a small pond at home.

Preliminary considerations
Before you go out to work will have to organize their work. Take pen and paper and draw your garden located and where appropriate, each of the plants that live there. Then, says the area occupied by the pond and within that outlines how to take the raft.

Once ready, you must purchase the necessary materials:

* Rope, the measure will be somewhat greater than the perimeter you thought for your pond.
* Pala.
* Manta EPDM Giscolene of Giscosa.
* Scissors.
* Irregular stones to mark the raft.
* Piquette.
* Hammer.

In your pond, as well as introducing aquatic plants, you may include some goldfish. In any case, it is important that you consider the depth. The plant requires between 20 and 25 cm. background, except the water lilies, which will require about 45 cm, while animals evolve, usually to 50 cm. surface, thus requiring 60 cm. If you're going to combine these options, various terraces have to leave that all can live and survive.

Starts work
The process will continue to develop our pond is the same used in the construction of large dams. On a smaller scale in your garden have a beautiful and original "mini lake" designed for yourself.

First, it defines the perimeter with the help of the string (note the first image). The rectangular shapes are simpler, but it all depends on your talent and your talent. Then use the shovel to dig inside (pictures 2 and 3). Recalls the need to leave if they did lack terraces. Once you've removed all the earth, removing pebbles or rocks and cover holes, the surface should be smooth and continuous.









Extends Giscolene sends rubber so that it covers the whole pond. Adapt it to the contours. It should be part of the membrane on the outside. Use stones or objects that hold weight to provisionally (picture 4). Fill the reservoir up to half, the blanket will be taking the final form, just as seen in the fifth frame. Place the plants you have chosen and ends to fill the pond. Coming to the end, cut from leftover edges Giscolene and sets the membrane to the ground with pickaxes. Finish decorating the pond perimeter bounds the stones, installing light bulbs, introduced fishes ...







Giscolene EPDM membrane of Giscosa
This material provides adaptability, flexibility and durability in building and maintaining a pond. Its use in agriculture and fish ponds, ornamental lakes, ponds and slurry alpechines, snowmaking ponds, irrigation canals and water reservoirs guarantee product quality.

The use of rubber as a core material of these insulation products has helped reservoirs installed in the 70 still in operation today and a long life ahead.
It should also be noted that the blanket Giscolene Friendly Fish is a good ally in ponds where they live aquatic species and facilitating their development and a longer life than other materials. Similarly, any Giscolene sheet has been made non-toxic, so you can live safely with animals.

The impermeable membrane can be achieved in building materials stores. In them, we will find exhibitors with different widths: the length is cut according to our needs up to 20 m. to facilitate handling and performance of work.

A colorful garden in 10 steps

When you buy a plant light FGW comes with a very extensive manual operaracion with valuable information on how to keep your plant in optimal light conditions FGW. It is important that the person responsible for the operation of the team have access to this information. I recommend that a copy is placed inside the room where it is installed in the cabin of the plant light.



Some things are obvious but often do not cause and can not light up the plant when you need it and in extreme cases can cause damage to your computer.

Most of the plants of light FGW the maintenance interval is every 500 hours for oil and filter change but within this period is important for the operator to make regular reviews of the team.

Before anything make sure you review or the room or area where it was installed plant light FGW is clean!



If the room is not clean can hardly see or detect fluid leaks in the equipment. Check for Cartons, bags or other objects can be sucked by the team and to obstruct the flow of air when the team is working on and make you hot ..

On the computer it is necessary to review the following points.

Review the level of fuel in the tank and fuel:

This seems obvious but it is critical that they see the fuel level in the tank. It is very common that as the plant is not used daily light take someone "borrowed" the fuel for something else and do not replace or fuel without leaving much less than they charged. There is nothing worse than find out when a power outage. FGW light plants come with a fuel level indicator on the tank base where you can check the level.



When loading of fuel and the revisions during a review that does not have water fuel. Water is a mortal enemy of the injection equipment. Within a few hours of use can damage components such as injection pump or nozzles that are very costly.

Reviewing the oil level and quality:

Although the oil is changed every 500 hours it is important that the oil level at the correct level. If the oil level is too low can damage the engine due to lack of lubrication. If the level is too high may cause leakage of the seals of the engine.

The manual indicates the exact type of oil to be used at different temperatures. The oil quality is critical because it takes a change intervals and oil filter based on that quality. If the lower quality leads to degradation and not have to lubricate the engine. You must use common sense in applying this plant light.

Assuming oil change every 500 hours it is in normal working conditions. If there is a lot of dust or contamination should be taken into account and reduce service intervals.

Review the coolant and the coolant level:

You can check the coolant level by removing the radiator cap. If the radiator tubes are very low level and this must be filled. Reviewing the radiator cap to see if in good condition and properly sealed. The rate of cooling is critical as this may create corrosion of the radiator and other components such as water pump is not used right. When you check the level if the door is corrosion is a clear indication that the coolant is not correct.

Review the level of electrolyte in the battery and ensure that this position.

The biggest reason for not starting the plants of light per battery is dead. This failure is more common and many times is that the team has long been lost and the battery stopped charging. The control panel Power Wizard 1.0 FGW indicates battery level and low level alarm batteries. However it is important that the battery electrolyte is sufficient to maintain the load. Take the opportunity to review the battery terminals are not corroded.

It is always advisable to use a battery charger to maintain the level of the battery when turned off. If you have installed make sure the charger is connected to and charge the battery.